Amazon Warrior Leaf Shield Pattern - Digital Download
$3.00
Make your own gorgeous Amazon Warrior Leaf Shield!
This download includes a PDF printable pattern.
This shield is easy to make! Print the pages, tape them together, cut out the pieces, transfer to your material and assemble! If this is to be worn with vambraces, I highly recommend that you make your shield strap measurements while wearing the vambraces to ensure a good fit.
These patterns are designed to be used with EVA or craft foam, but you can use any material you desire.
SIZING:
This pattern can be sized up or down depending on your needs. The patterned shield measures 18” across the widest section by 25” long.
SUGGESTED MATERIALS:
~ 6 to 8 mm EVA foam, or 3 to 4 EVA floor mat
(we recommend the large foam sheets available through TNTcosplay.com)
~ 2 mm adhesive backed foam
~ Chicago screws
~ Vinyl or leather for arm straps
~ Thermoplastic such as Worbla
~ Utility knife
~ Heat gun
~ Super glue
~ Pattern wheel/Tracing wheel
~ Something to seal your foam such as Mod Podge or Plastidip or both
~ Masking Tape
~ Paint of your choice
~ Contact cement
~ 2 button rivets (also known as “Sam Brown buttons”) (Optional)
Thank you and happy building!
Beverly
Head nerd at Downen Creative Studios
This download includes a PDF printable pattern.
This shield is easy to make! Print the pages, tape them together, cut out the pieces, transfer to your material and assemble! If this is to be worn with vambraces, I highly recommend that you make your shield strap measurements while wearing the vambraces to ensure a good fit.
These patterns are designed to be used with EVA or craft foam, but you can use any material you desire.
SIZING:
This pattern can be sized up or down depending on your needs. The patterned shield measures 18” across the widest section by 25” long.
SUGGESTED MATERIALS:
~ 6 to 8 mm EVA foam, or 3 to 4 EVA floor mat
(we recommend the large foam sheets available through TNTcosplay.com)
~ 2 mm adhesive backed foam
~ Chicago screws
~ Vinyl or leather for arm straps
~ Thermoplastic such as Worbla
~ Utility knife
~ Heat gun
~ Super glue
~ Pattern wheel/Tracing wheel
~ Something to seal your foam such as Mod Podge or Plastidip or both
~ Masking Tape
~ Paint of your choice
~ Contact cement
~ 2 button rivets (also known as “Sam Brown buttons”) (Optional)
Thank you and happy building!
Beverly
Head nerd at Downen Creative Studios
Make your own gorgeous Amazon Warrior Leaf Shield!
This download includes a PDF printable pattern.
This shield is easy to make! Print the pages, tape them together, cut out the pieces, transfer to your material and assemble! If this is to be worn with vambraces, I highly recommend that you make your shield strap measurements while wearing the vambraces to ensure a good fit.
These patterns are designed to be used with EVA or craft foam, but you can use any material you desire.
SIZING:
This pattern can be sized up or down depending on your needs. The patterned shield measures 18” across the widest section by 25” long.
SUGGESTED MATERIALS:
~ 6 to 8 mm EVA foam, or 3 to 4 EVA floor mat
(we recommend the large foam sheets available through TNTcosplay.com)
~ 2 mm adhesive backed foam
~ Chicago screws
~ Vinyl or leather for arm straps
~ Thermoplastic such as Worbla
~ Utility knife
~ Heat gun
~ Super glue
~ Pattern wheel/Tracing wheel
~ Something to seal your foam such as Mod Podge or Plastidip or both
~ Masking Tape
~ Paint of your choice
~ Contact cement
~ 2 button rivets (also known as “Sam Brown buttons”) (Optional)
Thank you and happy building!
Beverly
Head nerd at Downen Creative Studios
This download includes a PDF printable pattern.
This shield is easy to make! Print the pages, tape them together, cut out the pieces, transfer to your material and assemble! If this is to be worn with vambraces, I highly recommend that you make your shield strap measurements while wearing the vambraces to ensure a good fit.
These patterns are designed to be used with EVA or craft foam, but you can use any material you desire.
SIZING:
This pattern can be sized up or down depending on your needs. The patterned shield measures 18” across the widest section by 25” long.
SUGGESTED MATERIALS:
~ 6 to 8 mm EVA foam, or 3 to 4 EVA floor mat
(we recommend the large foam sheets available through TNTcosplay.com)
~ 2 mm adhesive backed foam
~ Chicago screws
~ Vinyl or leather for arm straps
~ Thermoplastic such as Worbla
~ Utility knife
~ Heat gun
~ Super glue
~ Pattern wheel/Tracing wheel
~ Something to seal your foam such as Mod Podge or Plastidip or both
~ Masking Tape
~ Paint of your choice
~ Contact cement
~ 2 button rivets (also known as “Sam Brown buttons”) (Optional)
Thank you and happy building!
Beverly
Head nerd at Downen Creative Studios
Make your own gorgeous Amazon Warrior Leaf Shield!
This download includes a PDF printable pattern.
This shield is easy to make! Print the pages, tape them together, cut out the pieces, transfer to your material and assemble! If this is to be worn with vambraces, I highly recommend that you make your shield strap measurements while wearing the vambraces to ensure a good fit.
These patterns are designed to be used with EVA or craft foam, but you can use any material you desire.
SIZING:
This pattern can be sized up or down depending on your needs. The patterned shield measures 18” across the widest section by 25” long.
SUGGESTED MATERIALS:
~ 6 to 8 mm EVA foam, or 3 to 4 EVA floor mat
(we recommend the large foam sheets available through TNTcosplay.com)
~ 2 mm adhesive backed foam
~ Chicago screws
~ Vinyl or leather for arm straps
~ Thermoplastic such as Worbla
~ Utility knife
~ Heat gun
~ Super glue
~ Pattern wheel/Tracing wheel
~ Something to seal your foam such as Mod Podge or Plastidip or both
~ Masking Tape
~ Paint of your choice
~ Contact cement
~ 2 button rivets (also known as “Sam Brown buttons”) (Optional)
Thank you and happy building!
Beverly
Head nerd at Downen Creative Studios
This download includes a PDF printable pattern.
This shield is easy to make! Print the pages, tape them together, cut out the pieces, transfer to your material and assemble! If this is to be worn with vambraces, I highly recommend that you make your shield strap measurements while wearing the vambraces to ensure a good fit.
These patterns are designed to be used with EVA or craft foam, but you can use any material you desire.
SIZING:
This pattern can be sized up or down depending on your needs. The patterned shield measures 18” across the widest section by 25” long.
SUGGESTED MATERIALS:
~ 6 to 8 mm EVA foam, or 3 to 4 EVA floor mat
(we recommend the large foam sheets available through TNTcosplay.com)
~ 2 mm adhesive backed foam
~ Chicago screws
~ Vinyl or leather for arm straps
~ Thermoplastic such as Worbla
~ Utility knife
~ Heat gun
~ Super glue
~ Pattern wheel/Tracing wheel
~ Something to seal your foam such as Mod Podge or Plastidip or both
~ Masking Tape
~ Paint of your choice
~ Contact cement
~ 2 button rivets (also known as “Sam Brown buttons”) (Optional)
Thank you and happy building!
Beverly
Head nerd at Downen Creative Studios
